Four sailors are using a light capstan to pull in their ship's anchor at a steady rate. One of them is shown in the diagram. The diameter of the capstan's drum is 1 m and the spokes on which the sailors are pushing each project horizontally from the centre of the capstan. Each sailor is pushing with a force of 300 N, horizontally and at right angles to his spoke at a distance of 1.5 m from the centre of the capstan. The anchor cable is taut; it passes over a frictionless pulley and then makes an angle of 20° with the horizontal. Note: Only one of the four sailors is shown. (iii) Find the value 20° Figure 20.32 (i) Find the tensi The mass of the sh (ii) Find the acce that no other ship. In fact the accelera 0.0015 ms 2. Part explained by fricti in a resisting mom the force of resistan through the water